Limestone Road Base
Crushed limestone road base that compacts hard and sets firm. A popular base under paving and driveways.
In stock for delivery
Price includes GST
The rate is per tonne. Delivery is added from your address.
Tipped on site
A tipper matched to the weight of this load.
2-hour windows
Choose a date and a window between 7am and 5pm.
Right material, right job
What's it used for?
Crushed limestone road base that compacts hard and sets firm. A popular base under paving and driveways.
- Driveway and paving base
- Building pads
- Rural roads and tracks
- Hardstands
Measure once, order with confidence
How much do you need?
Work out the quantity
Enter your area to estimate volume, weight and material cost.
Your estimate
Limestone Road Base
2.5m³
- Approx. weight
- 4.0 t
- Material from
- $360
Measured 2.00 m³ plus 10% for compaction and settling, rounded up to the nearest 0.5 m³ (minimum 1 m³). Your exact material and delivery price is confirmed from your address before you pay.
The other half of the price
The material is one part.Delivery matters too.
$90 per tonne is the material. Enter your address to see the delivered total before you pay.
Check delivery- 1
Your address sets the rate
Distance, access and the truck needed all change the delivery cost.
- 2
The load sets the truck
Limestone Road Base weighs about 1.6 t per m³, so the booking picks a tipper that can carry it.
- 3
You choose the drop
A clear, firm spot on site. Add notes for gates, wires and soft ground.
Good to know
Before your next load.
How much does Limestone Road Base cost?
Limestone Road Base starts from $90 per tonne including GST. Delivery is calculated from your address, quantity and the truck needed, and the full delivered price is shown before you pay.
How many tonnes is a cubic metre of Limestone Road Base?
Limestone Road Base weighs roughly 1.6 tonnes per cubic metre loose, so 5 m³ is about 8 tonnes. Moisture can make it heavier. The booking uses this weight to pick the right tipper.
How much Limestone Road Base do I need?
Multiply length × width × depth in metres. For paver sub-base (foot traffic) at about 100 mm deep, 1 m³ covers roughly 10 m². Use the calculator on this page for an exact figure, including a 10% allowance.
What is the minimum order?
The minimum order is 1 cubic metre. For larger orders, the booking works out the number of loads and recommends the right tipper automatically.
When can it be delivered?
Choose today, tomorrow or a specific date, subject to availability, and pick a 2-hour window between 7am and 5pm.
Where will the truck tip it?
On your driveway or a firm, clear area of your site. Tell us about narrow gates, overhead wires, slopes or soft ground when you book. If it must be tipped on the road or nature strip, check your council's requirements first.
Ready when you are