Coarse River Sand Delivered
Sharp, coarse-grained washed sand. Its angular grains add strength to concrete and improve drainage in soil and potting mixes.
From$95.33per tonne
GST included
Approx. 1.5 t per m³
See your full delivered price before you pay. No account needed.
- Approx. weight
- 1.5 t per m³
- Minimum order
- 1 m³
- Delivery
- Tipper truck, sized to your load
- Delivery windows
- 2-hour slots, 7am to 5pm
Uses
What is Coarse River Sand used for?
- Concrete mixing with aggregate
- Screeds
- Drainage and potting mixes
- Opening up heavy clay soil
How much Coarse River Sand do I need?
Enter your area to estimate volume, weight and material cost.
Your estimate
Coarse River Sand
1.5m³
- Approx. weight
- 2.3 t
- Material from
- $214.50
Measured 1.00 m³ plus 10% for compaction and settling, rounded up to the nearest 0.5 m³ (minimum 1 m³). Your exact material and delivery price is confirmed from your address before you pay.
How it works
Delivered to your site in 3 simple steps
Choose your material
Pick from 76 bulk landscape and building materials, each priced per tonne with GST included.
Enter quantity & address
Tell us how much you need and where it's going. We match the right tipper and show your delivered price instantly.
Pick a date & pay
Choose a delivery date and a 2-hour window between 7am and 5pm, then check out securely online.
Often ordered together
10 mmDry Concrete Blend 10 mm (No Cement)
Coarse sand and 10 mm aggregate pre-mixed for you. Add cement and water on site for footings, post holes and small slabs.
From$67.78 /t
View
14 mmBlue Metal Aggregate 14 mm
14 mm blue metal is a common concrete aggregate and drainage stone, and it makes a hard-wearing driveway topping.
From$80.67 /t
ViewMore sand
View all sand
White Bricklaying Sand
A pale mortar sand for face brickwork where a white or light-coloured mortar joint is part of the look.
From$86.88 /t
View
Plastering Sand
Fine, graded sand made for cement render and plaster. It gives a smooth, workable mix that's less prone to cracking.
From$86.67 /t
View
Fine Washed Sand
Washed to remove clay and silt, leaving a clean, fine-grained sand for rendering, paver joints and top-dressing.
From$86 /t
View
Washed Bedding Sand
Clean, even-grained washed sand that screeds flat, compacts evenly and drains freely under pavers, flagstones and pools.
From$79.33 /t
ViewFAQs
Coarse River Sand FAQs
How much does Coarse River Sand cost?
Coarse River Sand starts from $95.33 per tonne including GST. Delivery is calculated from your address, quantity and the truck needed, and the full delivered price is shown before you pay.
How many tonnes is a cubic metre of Coarse River Sand?
Coarse River Sand weighs roughly 1.5 tonnes per cubic metre loose, so 5 m³ is about 7.5 tonnes. Moisture can make it heavier. The booking uses this weight to pick the right tipper.
How much Coarse River Sand do I need?
Multiply length × width × depth in metres. For levelling under slabs or tanks at about 50 mm deep, 1 m³ covers roughly 20 m². Use the calculator on this page for an exact figure, including a 10% allowance.
What is the minimum order?
The minimum order is 1 cubic metre. For larger orders, the booking works out the number of loads and recommends the right tipper automatically.
When can it be delivered?
Choose today, tomorrow or a specific date, subject to availability, and pick a 2-hour window between 7am and 5pm.
Where will the truck tip it?
On your driveway or a firm, clear area of your site. Tell us about narrow gates, overhead wires, slopes or soft ground when you book. If it must be tipped on the road or nature strip, check your council's requirements first.
Order Coarse River Sand today
From $95.33 per tonne including GST. Enter your address to see the delivered price in under a minute.