General Bricklaying Sand Delivered
A fine, slightly clayey mortar sand that mixes smoothly and holds its shape on the trowel. The go-to sand for laying bricks and blocks.
From$59.38per tonne
GST included
Approx. 1.6 t per m³
See your full delivered price before you pay. No account needed.
- Approx. weight
- 1.6 t per m³
- Minimum order
- 1 m³
- Delivery
- Tipper truck, sized to your load
- Delivery windows
- 2-hour slots, 7am to 5pm
Uses
What is General Bricklaying Sand used for?
- Brick and block laying mortar
- Garden, letterbox and retaining walls
- Repointing and masonry repairs
Pro tip: Mix mortar at the ratio on your cement bag, typically 1 part cement to 4–6 parts sand, and add lime or a plasticiser for workability.
How much General Bricklaying Sand do I need?
Enter your area to estimate volume, weight and material cost.
Your estimate
General Bricklaying Sand
1.5m³
- Approx. weight
- 2.4 t
- Material from
- $142.50
Measured 1.00 m³ plus 10% for compaction and settling, rounded up to the nearest 0.5 m³ (minimum 1 m³). Your exact material and delivery price is confirmed from your address before you pay.
How it works
Delivered to your site in 3 simple steps
Choose your material
Pick from 76 bulk landscape and building materials, each priced per tonne with GST included.
Enter quantity & address
Tell us how much you need and where it's going. We match the right tipper and show your delivered price instantly.
Pick a date & pay
Choose a delivery date and a 2-hour window between 7am and 5pm, then check out securely online.
Often ordered together
More sand
View all sand
Thermal Cable Bedding Sand
A bedding sand with low thermal resistivity that draws heat away from buried electrical cables, for utility and solar trenching.
From$67.33 /t
View
Natural Fill Sand
Unwashed natural sand for bulk filling and raising levels where you don't need a clean, washed finish.
From$48 /t
View
Packing Sand
A general-purpose sand with enough fines to compact firmly. Used to pack around footings and pipes and to build up pads under slabs.
From$46.88 /t
View
Washed Play Sand
Soft, washed sand with low dust and clay, for sandpits, play areas and beach-style features.
From$73.33 /t
ViewFAQs
General Bricklaying Sand FAQs
How much does General Bricklaying Sand cost?
General Bricklaying Sand starts from $59.38 per tonne including GST. Delivery is calculated from your address, quantity and the truck needed, and the full delivered price is shown before you pay.
How many tonnes is a cubic metre of General Bricklaying Sand?
General Bricklaying Sand weighs roughly 1.6 tonnes per cubic metre loose, so 5 m³ is about 8 tonnes. Moisture can make it heavier. The booking uses this weight to pick the right tipper.
How much General Bricklaying Sand do I need?
Multiply length × width × depth in metres. For levelling under slabs or tanks at about 50 mm deep, 1 m³ covers roughly 20 m². Use the calculator on this page for an exact figure, including a 10% allowance.
What is the minimum order?
The minimum order is 1 cubic metre. For larger orders, the booking works out the number of loads and recommends the right tipper automatically.
When can it be delivered?
Choose today, tomorrow or a specific date, subject to availability, and pick a 2-hour window between 7am and 5pm.
Where will the truck tip it?
On your driveway or a firm, clear area of your site. Tell us about narrow gates, overhead wires, slopes or soft ground when you book. If it must be tipped on the road or nature strip, check your council's requirements first.
Order General Bricklaying Sand today
From $59.38 per tonne including GST. Enter your address to see the delivered price in under a minute.