Road Base Type 2.5 Delivered
An economical, lower-grade road base for bulk filling and sub-base where high strength isn't specified.
From$25per tonne
GST included
Approx. 1.6 t per m³
See your full delivered price before you pay. No account needed.
- Approx. weight
- 1.6 t per m³
- Minimum order
- 1 m³
- Delivery
- Tipper truck, sized to your load
- Delivery windows
- 2-hour slots, 7am to 5pm
Uses
What is Road Base Type 2.5 used for?
- Bulk filling and levelling
- Lower sub-base layers
- Rural tracks
- Temporary site access
How much Road Base Type 2.5 do I need?
Enter your area to estimate volume, weight and material cost.
Your estimate
Road Base Type 2.5
2.5m³
- Approx. weight
- 4.0 t
- Material from
- $100
Measured 2.00 m³ plus 10% for compaction and settling, rounded up to the nearest 0.5 m³ (minimum 1 m³). Your exact material and delivery price is confirmed from your address before you pay.
How it works
Delivered to your site in 3 simple steps
Choose your material
Pick from 76 bulk landscape and building materials, each priced per tonne with GST included.
Enter quantity & address
Tell us how much you need and where it's going. We match the right tipper and show your delivered price instantly.
Pick a date & pay
Choose a delivery date and a 2-hour window between 7am and 5pm, then check out securely online.
More road base & crushed rock
View all road base & crushed rock
20 mmClass 3 Crushed Rock 20 mm
A slightly lower specification than Class 2, used as sub-base under pavements and for general hardstand and driveway work.
From$43.75 /t
View
20 mmClass 2 Crushed Rock 20 mm
High-grade 20 mm crushed rock with a tight grading. It's used as base course under roads, driveways and slabs.
From$46.88 /t
View
20 mmGeneral Purpose Road Base 20 mm
A blend of 20 mm crushed rock and fines that compacts into a firm, stable base under driveways, paths, pavers and slabs.
From$51.25 /t
View
40 mmGeneral Purpose Road Base 40 mm
Coarser 40 mm road base for heavier loads, soft ground and deeper sub-base layers.
From$52.78 /t
ViewFAQs
Road Base Type 2.5 FAQs
How much does Road Base Type 2.5 cost?
Road Base Type 2.5 starts from $25 per tonne including GST. Delivery is calculated from your address, quantity and the truck needed, and the full delivered price is shown before you pay.
How many tonnes is a cubic metre of Road Base Type 2.5?
Road Base Type 2.5 weighs roughly 1.6 tonnes per cubic metre loose, so 5 m³ is about 8 tonnes. Moisture can make it heavier. The booking uses this weight to pick the right tipper.
How much Road Base Type 2.5 do I need?
Multiply length × width × depth in metres. For paver sub-base (foot traffic) at about 100 mm deep, 1 m³ covers roughly 10 m². Use the calculator on this page for an exact figure, including a 10% allowance.
What is the minimum order?
The minimum order is 1 cubic metre. For larger orders, the booking works out the number of loads and recommends the right tipper automatically.
When can it be delivered?
Choose today, tomorrow or a specific date, subject to availability, and pick a 2-hour window between 7am and 5pm.
Where will the truck tip it?
On your driveway or a firm, clear area of your site. Tell us about narrow gates, overhead wires, slopes or soft ground when you book. If it must be tipped on the road or nature strip, check your council's requirements first.
Order Road Base Type 2.5 today
From $25 per tonne including GST. Enter your address to see the delivered price in under a minute.