Australian Earthmoving & Waste Utility Tool

Excavation Soil Bulking Factor & Skip-vs-Tipper Load Calculator

Quick Engineering Rule: Never order skip bins or tipper trucks based on in-ground Bank Cubic Metres (BCM). In Australia, excavated clay swells by 1.35× (1.85 t/BCM) and broken concrete swells by 1.45× (2.40 t/BCM). For loads under 6 m³ loose (≤8 tonnes), a 1 m³ to 6 m³ Marrel skip bin is cheapest; above 8 tonnes with a machine on-site, booking a 6-Wheeler Bogie Tipper (12.5t) or Truck & Dog (33t) via Tipaload Cart & Dispose saves 25% to 42% with $0 council street permits.

Step 1 · Enter Excavation or Slab Dimensions

Heavy reactive clay common across Sydney, Melbourne West/North, and Brisbane.

Quick Australian Project Presets:
Step 2 · Live Bulking & Tonnage Output1.35× Bulking Factor

Bank Volume (BCM)

42 m³

Loose Volume (LCM)

56.7 m³

Estimated Weight

77.7 t

Option A · Stationary Skip / Hook Bins

Requires 10 × 6m³–8m³ Heavy Skip Bins (capped at ~8t per bin under NHVR road weight limits).

Option B · 6-Wheeler Bogie Tipper (Cart & Dispose)

7 × Bogie Tipper load(s) (12.5t / 9.5m³ loose per truck). Fits standard residential streets with $0 council street bin permit.

Option C · Truck & Dog Combination (Bulk Haulage)Lowest Cost / Tonne

3 × Truck & Dog load(s) (33t / 26m³ loose per combination). Requires wide street frontage and machine loading.

NHVR Road Weight Note: At 77.7 tonnes, you cannot put this entire load into a single 15m³–40m³ hook bin (legal road lift limit is ~12.5t net). Use Tipper Cart & Dispose or multiple heavy bins.

Australian Earthmoving Bulking Factors & Material Weights (BCM to LCM)

When virgin ground or solid concrete is excavated, air pockets introduced between fragments increase the loose volume (LCM). Use this reference table to convert your trench, pool, or slab dimensions into loose cubic metres and road-legal tonnes:

Material TypeIn-Situ Weight (t / BCM)Bulking / Swell FactorLoose Weight (t / LCM)Site & Tip Classification Notes
Compacted Clay / Virgin Subsoil (VENM)1.85 t/m³1.35× (+35%)1.37 t/m³Heavy reactive clay common across Sydney, Melbourne West/North, and Brisbane.
Topsoil / Garden Loam1.45 t/m³1.25× (+25%)1.16 t/m³Must be free of plastic, bricks, or heavy root balls to qualify as clean soil.
Sand (Bedding / Coastal Sand)1.60 t/m³1.12× (+12%)1.43 t/m³Low swell factor (~12%) but high density—watch skip bin weight limits.
Sandstone / Ripped Shale / Rock2.25 t/m³1.50× (+50%)1.50 t/m³Voids between broken rock fragments expand bank volume by ~50%.
Solid Concrete Slab / Driveway (Broken into Rubble)2.40 t/m³1.45× (+45%)1.65 t/m³100% recyclable at lower gate fees when kept separate from soil and general waste.
Clay Bricks, Pavers & Roof Tiles1.90 t/m³1.40× (+40%)1.36 t/m³Eligible for dedicated masonry/brick & concrete recycling rates.

Worked Examples: Skip Bin vs. Bogie Tipper vs. Truck & Dog

Tipaload connects you with 7 to 10 verified local skip bin and tipper operators per suburb using live dynamic pricing. Here is how common Australian residential and civil jobs compare:

Project ScenarioIn-Ground Cut (BCM)Loose Volume & MassBest Tipaload EquipmentWhy It Wins
Small Courtyard Concrete Path Breakout10 m × 1.2 m × 0.10 m (1.20 m³ BCM)1.74 m³ LCM · 2.88 tonnes1 × 2 m³ or 3 m³ Heavy Marrel Skip BinUnder 3 tonnes; easy to load progressively by wheelbarrow over a 7-day hire.
Standard 40 m² Residential Driveway Demolition8.0 m × 5.0 m × 0.125 m (5.00 m³ BCM)7.25 m³ LCM · 12.00 tonnes1 × 6-Wheeler Bogie Tipper Load (Cart & Dispose)Fits in a single 12.5t bogie tipper load (~25–40% cheaper than ordering two separate heavy skip bins, with $0 council street permit).
In-Ground 7 m × 4 m Swimming Pool Excavation7.0 m × 4.0 m × 1.60 m (44.80 m³ BCM)60.48 m³ LCM · 82.88 tonnes3 × Truck & Dog Loads (or 7 × Bogie Tipper Loads)82.88t of clay would require 11 heavy skip bins; live-loading tippers clears the cut in 1 day at the lowest per-tonne gate rate.

Excavation, Bulking Factor & Haulage FAQs

What is the bulking factor (swell factor) for clay and soil in Australia?

In Australian earthmoving, compacted clay has a bulking factor of 1.30 to 1.40 (1.35× average) and an in-situ weight of roughly 1.85 tonnes per Bank Cubic Metre (BCM). That means digging a 10 m³ trench in solid clay creates 13.5 m³ of loose clay (LCM) weighing 18.5 tonnes. Topsoil swells by 1.25× (1.45 t/BCM), sand by 1.12× (1.60 t/BCM), and broken concrete rubble by 1.45× (2.40 t/BCM).

When is a tipper truck cheaper than a skip bin for soil or concrete removal?

For loads under 6 m³ loose (up to 6–8 tonnes) or jobs loaded by wheelbarrow over several days, a 1 m³ to 6 m³ Marrel skip bin is usually cheapest. Once dense clay, soil, brick, or concrete exceeds 8 tonnes (~5 m³ in-ground bank volume) and you have an excavator or bobcat on-site, booking a 6-Wheeler Bogie Tipper (12.5t payload) or Truck & Dog (33t payload) via Tipaload Cart & Dispose reduces haulage and tip costs by 25% to 42%.

Why can't I fill a 15 m³ or 20 m³ hook bin to the top with soil or concrete?

Under National Heavy Vehicle Regulator (NHVR) road axle mass limits, hook-lift trucks can legally lift and transport roughly 10 to 12.5 tonnes of net bin weight on public roads. Filling a 20 m³ hook bin to the brim with concrete rubble or wet clay would weigh over 30 tonnes. Large 15 m³ to 40 m³ hook bins are engineered for bulky light commercial, demolition timber, green waste, and C&I strip-outs.

Do I need a council permit if I book a Cart & Dispose tipper truck instead of a skip bin?

No stationary bin permit is required for a live-loaded Cart & Dispose tipper truck. Because the tipper arrives, is loaded by your machine or crew in 15 to 30 minutes, and drives straight to a licensed transfer station or resource recovery facility, nothing is left sitting overnight on council nature strips or road reserves.